• structural-LVL-beams

LVL Preliminary Selection Worksheet

Use an LVL beam selection worksheet to collect a named member’s span, loads, supports, product data and order needs before requesting a section recommendation. Tie each value to a unit and document issue. Leave unknown values blank and flag them To confirm. This SENSO download provides editable Excel and fillable PDF forms for preliminary review. It does not calculate beam capacity, choose a section or replace qualified structural design.

LVL beam selection worksheet with span load bearing product evidence and order input groups
LVL beam selection worksheet links project inputs to their units, sources and drawing revision.

Download the LVL beam selection worksheet

Choose the Excel file for editing and the PDF for a shared project record. Both use revision M02-08 R1. The workbook has three tabs: Worksheet, Loads and Product evidence. The PDF has four fillable pages and a dimension sketch.

Use one file per member configuration. Then keep the same member ID on every sheet and attachment. Save a new request revision when geometry, loads or product choices change.

Record span inputs and bearing separately

First, identify whether the member acts as a joist, bearer, roof beam or header. Next, mark its supports and load path. A clear span alone cannot define the required section.

Input groupRecord and unitRequired context
SpanClear span and design span, mmDefinition and marked drawing issue
Section and lengthWidth × depth and order length, mmProposed product, orientation and plies
SupportsLeft and right bearing, mmSupport material, hanger and restraint details
Load collectionSpacing and supported width, mmMember role and load path
ActionsArea kPa, line kN/m or point kNDirection, location, duration and load basis
MovementDeflection limit, mm or span ratioLoad component, time condition and source
Use and supplyExposure, treatment, quantity and deliveryProject requirement and supplier response

These are input fields and units, not product specifications or allowable values.

In particular, do not copy overall order length into the span field. The PDF sketch separates support contacts from the opening. Also, check the exact span definition in the current matched LVL beam span tables. Use the LVL beam sizes guide for section planning.

LVL beam selection worksheet separating clear span overall order length and bearing contacts
The LVL beam selection worksheet records clear span, order length and both bearing contacts separately.

Keep product evidence separate from test results

LVL means laminated veneer lumber. It uses bonded wood veneers oriented mainly along the member. APA’s structural composite lumber guidance explains the product family and its uses. However, structural properties belong to the named product and its qualification.

Evidence typeWhat it can establishWhat still needs checking
Product specificationNamed grade, section and stated useIssue, tolerances and supply identity
Declared structural dataProduct strength and stiffness basisUnits, axis, conditions and design rules
Standard requirementRules within the standard’s scopeAdopted edition and product conformity
Typical value or single testGeneral context or one measured resultWhether it qualifies as design data

Stiffness affects movement, while strength values address different failure checks. Therefore, record bending, shear and bearing data separately. A higher stiffness label does not establish the whole beam’s capacity. For comparisons, keep grade, section and use linked in our structural LVL decision guide.

Use the load checklist to expose missing inputs

For example, a drawing may show a truss reaction without its magnitude. Record the point-load location, leave its value blank and assign an owner to obtain it. Entering 0 kN would claim a known zero force.

Input statusMeaningNext action
To confirmValue or source remains missingKeep it open and name a contact
ProvidedInput and source recordedSubmit for the required review
Not applicableItem excluded with a reasonRecord who confirmed the exclusion

These statuses track information only. Even a fully completed LVL beam selection worksheet needs a separate design response and order release.

LVL beam selection worksheet input statuses with a separate qualified design review record
A completed LVL beam selection worksheet still needs a separate qualified design review and order release.

Check standards, use limits and the supplier

For Australian projects, AS/NZS 4357.0:2022 covers structural LVL product requirements. AS 1720.1 addresses timber design methods. The project designer must confirm adopted editions and amendments. A standard number on a quote does not prove product certification.

Request the evidence ID, issuer, current status, product and plant scope. Also, match it to the supplied marking. EWPAA’s LVL conformance note explains why product identity and declared properties matter.

Confirm exposure, treatment, moisture requirements and connection details as well. Do not assume a floor or header product suits permanent weather exposure, formwork or scaffolding. Each use needs matching evidence.

LVL beam selection worksheet questions

Will this LVL beam selection worksheet recommend a beam size?

No. It records inputs for a qualified review. It contains no span, load-combination or capacity calculator.

Can I send it before all loads are available?

Yes, for preliminary discussion. Flag missing loads and identify who will supply them. Keep final selection pending.

Can I enter imperial units in the LVL beam selection worksheet?

Only after clearly relabelling the affected units and confirming conversions. The default dimension fields use millimetres.

Does Provided mean the beam is approved?

No. It means an input and its source have been recorded. Store the qualified design response separately.

Can I reuse the form for another product grade?

Create a revised request. Then replace the product evidence and have the changed selection checked.

What should accompany an RFQ?

Attach drawings, member IDs, quantities, ordered lengths, product evidence and open questions. State currency, price unit, delivery term and destination.

What happens when a support or load changes?

Update the drawing and request revision. Resubmit the affected member for qualified review before order release or site changes.

Send the span, load and support conditions for preliminary product guidance. Contact SENSO with your completed LVL beam selection worksheet and drawings. We can review the supply request and confirm the proposed product information. Final structural design requires qualified verification.


Post time: Nov-16-2026
Leave Your Message

    Leave Your Message