• structural-LVL-beams

SENSO LVL 10

SENSO LVL 10

wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

SENSO® LVL 10 is our latest high-performance engineered timber for Aussie builds. Stronger, straighter and lighter than traditional timber (and many higher-grade LVL), it’s ideal for lintels, rafters and subfloor members, and delivers superior wall frames. Use it as a direct substitute for MGP10 or nominate as a design alternative to MGP12 for studs, plates and noggins.
SENSO® LVL 10 also made for ceiling and roof battens and temporary bracing, comes H2S termite treated with Weather Shield+ protection, manufactured to AS/NZS 4357 from certified spruce, eucalypt and pine FSC/PEFC ready.
SENSO LVL 10 offer significant economic and technical benefitscompared to alternative materials.

Product Detail

Structural LVL Studs Wall Framing

wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

SENSO aims to produce the world’s most stable framing members for long walls and tall rooms. That means straight geometry, repeatable stiffness, and clean edges that hold fasteners. SENSO LVL 10- LVL studs wall framing was built to deliver those three outcomes on busy sites with changing weather.

SENSO LVL 10 for dependable framing in houses and light commercial work. Billets are laminated and pressed under strict control. Grading aligns with Australian practice for structural tasks. Capacity is predictable from piece to piece. Project planning is easier when performance is consistent.

Against typical MGP10 pine, SENSO LVL 10 provides higher stiffness and better straightness control. Compared with many E10 LVL lines, it focuses on line control, moisture management, and consistent machining. Frames need fewer shims. Lining sits flat. Door sets and windows align on the first pass. The target is fewer corrections and faster cycle time per floor.

SENSO structural LVL salute the discipline of Australian standards and leading LVL benchmarks. Manufacturing aligns with AS/NZS 4357. Design follows AS 1684 and AS 1720.1. Sections interface with standard plates, tracks, and noggings. LVL studs integrate cleanly with bracing and sheathing systems. Common sizes and lengths match Australian framing practice.

Treatment to H2S helps resist termites in designated zones. Type A bonding and water-repellent nanocoating supports use during wet seasons and transport. Protective wrap reduces UV and moisture exposure in yards.

Factory chamfered edges improve safety on site. Moisture content is controlled for dimensional stability. Ends are square, so cuts start clean and accurate. Fasteners hold well at edges without splitting. Sawing produces tidy faces that accept finishes. Site handling is simple with clear pack labeling.

wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing Weight and Package

LVL 10 Section Code Overall Depth (mm) Thickness (mm) Weight (kg/m) Package (pieces/pallet)
SL1035 42 35 0.9 216
70 35 1.5 135
90 35 1.9 108
SL1045 70 45 1.9 108
90 45 2.5 84
140 45 3.8 56
190 45 5.2 42
240 45 6.6 28
290 45 7.9 28
300 45 8.2 28
SL1063 240 63 9.2 20
300 63 11.5 20

Available in standard lengths：
2400mm 2700mm 3000mm 3300mm 3600mm 3900mm 4100mm 4200mm 4800mm 5400mm 6000mm 7500mm 8000mm

Maximum Length: Available Up To 12m Lengths

Each piece of SENSO LVL 10 is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards.

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing

wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL
wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

Supply programs are set for large builds and staged releases. Packs are configured for quick unloading and safe lifting.
SENSO Structural LVL is supplied in seaworthy packs with UV-stable PP/PE woven wrap, PET strapping both ways and export pallets with clear fork-tyne access, plus waterproof labels with barcodes for end-to-end traceability.
SENSO delivers steady supply windows for critical paths.

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing Applications

wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

SENSO LVL 10 Use for external and internal wall framing in housing. It suits long wall runs and tall heights.
Apply in wet area walls where stability matters. The product helps keep tiles and linings true.
Use as trimmers, lintels, and jamb studs for openings. It supports wide windows and doors.
Employ as studs in bracing walls with tight tolerances. Fasten sheathing with less correction.
Fit as service walls where straight lines speed fit-offs. Electricians and plumbers work faster.

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing Specifications

Veneer Thickness Joint Group
Constant through the product thickness JD3 – for nails, bolts and screws
Joints Bond
Full sheet / Scarf and / or butt jointed  A Bond – AS/NZS 2098.2
Moisture Content Adhesive
8% – 15% (at time of despatch) E0
Dimensional Tolerances Density
Available on request 580-610 kg/m³ (approximately)
Straightness Certified
Available on request JAS-ANZ / FSC / PEFC
Storage Branding
Store on level bearers at maximum 1800mm centres well clear of the ground, and cover to keep dry but allow ventilation Each pallet of SENSO LVL Timber is branded as least once with the product name for identification and evidence of compliance with manufacturing control standards
 
wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing Features & Benefits

  • High Structural Integrity
  • Superior Load Capacity
  • Water-repellent nanocoating
  • Exceptional Stability
  • Eco-Friendly Production
  • Customizable Dimensions
  • Cost and Time Efficiency
  • Clearly branded for easy identifcation on-site.
  • Engineered to exact tolerances.
  • Low formaldehyde emission (E0)
  • Available PEFC or FSC “Chain of Custody” certifed on request.
  • BENCHMARK Certified
  • OEM or ODM service available.
wall studs, wall stud, wall framing, LVL stud, SENSO LVL 10, stud wall framing, LVL studs, wall studs, wood stud, LVL wall framing, wooden stud, LVL stud wall, Stud LVL wall framing, Wall Stud LVL, framing,structural LVL studs,engineered studs, laminated veneer lumber studs, LVL framing, LVL framing studs, LVL stud spacing, LVL stud sizes, LVL studs cost, stud LVL, stud framing, Structural Framing LVL, Framing LVL

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing Certified By

As a one-stop LVL manufacturer and wholesaler. We have great advantages in supplying building materials wholesalers and construction sites. SENSO LVL 10 studs frame straight, fast, and strong. Factory control secures quality, sizes, and packing.

Price mindshare, not only unit price. Total cost falls when LVL production technology is sufficiently specialized and there are sufficiently advantageous raw material channels. SENSO LVL 10 trades material consistency for time saved. Project teams gain schedule certainty. Distributors gain cleaner stock rotation, fewer claims, and simpler replenishment planning across stages.

Order standard lengths or specify custom cuts. We prepare barcoded packs and seaworthy wrap. Container loads can be mixed by size for better yield. Compliance files are ready for AS/NZS checks. FSC/PEFC chain-of-custody is available on request. Get factory pricing, lead times, and loading plans today.

＞＞＞

SENSO LVL 10 – LVL Studs Wall Framing FAQ

Q: What is SENSO LVL 10 used for??

A: SENSO LVL 10 is engineered laminated veneer lumber. It is used for studs, plates, trimmers, and lintels. It suits housing and light commercial frames. Design follows AS 1684 and AS 1720.1.

Q: What sizes and lengths are available?

A: SENSO LVL 10 supplies common thicknesses of 35, 45, and 63 mm. Depths range from 42 mm to 300 mm. Standard lengths are 2.4 m to 8.0 m. Custom lengths up to 12 m are available. All packs are barcoded and wrapped..

Q: How does SENSO LVL 10 handle termites and moisture?

A: SENSO LVL 10 is H2S termite treated as standard. H3 or other treatments are available on request. Type A bonding supports wet seasons and transport. Use site covers and airflow for best storage.

Q: How do LVL studs compare with sawn MGP framing?

A: LVL studs offer higher stiffness than typical sawn MGP. They remain straight with minimal twist or bow. Frames build faster and line up better. Use engineering design for spans and tall walls.

Q: Can SENSO provide documentation and logistics support?

A: SENSO provides compliance and test documents on request. FSC or PEFC chain-of-custody can be supplied. Container loads can mix sizes by plan. Packing lists, labels, and loading plans are included. Delivery is arranged to your port or yard.

  • Previous: H20 Beam Formwork Timber
  • Next: Not Next

    • You Might Also Like

    Leave Your Message

      Leave Your Message

        Hit enter to search or ESC to close